Add to Favorites | Contact us | Chinese
Position:home>Maintenance>
Buddhist templeput on the brakes of your meeting shake handshandle detect daily
From;    Author:Stand originally
Like the footplate of foot brake, handle of hand Buddhist templeput on the brakes also has to pull the route that use. Set normally, when handle carries the 70 % that pull whole journey, system of hand Buddhist templeput on the brakes should be in normal brake position, before the power of apply the brake that checking hand Buddhist templeput on the brakes so, the job that should find out this 70 % first is nodded, this work place can pass the noise of several ratchet to decide.
  
Park the car in quieter place, pull hand stop slowly, the sound blocking Da that the edge plays to count ratchet to give out by the side of, till till the hand the handle plays an end. Next the 70 % position of gross of cipher out noise, this position is the effective work place of handle of hand Buddhist templeput on the brakes.
  
Drive the car to gradient in order of bigger, road surface (had better be blacktop) on brae, step on brake, hang neutral (if be automatic gearshift,hang in N to block) , pull handle of hand Buddhist templeput on the brakes the work that a moment ago defined to choose the place. Loosen slowly next brake pedal, if the car did not happen,slide, the efficiency that shows hand Buddhist templeput on the brakes is good. Because clearance exists inside brake, it is sometimes after loose footplate, the car will be slight and slip, just halt next, the space that wants this to slide only is very little, it is normal that the efficiency of hand Buddhist templeput on the brakes also is belonged to. Mix uphill declivous should do each.
  
Besides efficiency of apply the brake, return the sensitivity that should check hand Buddhist templeput on the brakes, it is particularly important that this starts to brae. Slow on the road surface that does not have gradient fast travel, carry handle of shake handshandle Buddhist templeput on the brakes slowly, feel the sensitivity of one helper handle and joint are nodded. Method of this kind of examination can make orgnaization of hand Buddhist templeput on the brakes wears away, the number that examines so is unfavorable and too much.
  
In afore-mentioned examinations, if discover the efficiency of apply the brake of hand Buddhist templeput on the brakes or sensitivity are not ideal, can pass normally adjust the operation steel cable of hand Buddhist templeput on the brakes will solve. The joint of the bottom in handle of hand Buddhist templeput on the brakes and cupreous cable (general by interior trim enclothe) have an adjustable compensation orgnaization, open locking screw cap with spanner pine, OK the length of cable of drawing brake copper. But, the adjustment of some cars is set in car bottom, if inconvenience is adjusted, should hand in will handle by professional maintenance technician.
  
A lot of people think, if meet brake system to be out of order, can pull start work Buddhist templeput on the brakes comes decelerate, actually this kind of practice is wrong, because orgnaization of hand Buddhist templeput on the brakes is inexact, the power of apply the brake that controls two side distributings not all, pull when high speed travel start work Buddhist templeput on the brakes makes very easily among them at the same time rear wheel is held in the arms dead, produce sideslip, very dangerous. Right way is block through falling come decelerate, arrive when speed is very low just pull start work Buddhist templeput on the brakes stops vehicle Buddhist templeput on the brakes.
Previous12 Next
About us | Legal Notices | Sitemap | Links | Partner